CAT 416D Backhoe Loader

Designed for long hours of operation and low cost production, the Cat 416D features rugged construction, a spacious work environment, high rotation backhoe and easy maintenance.

Cat 416D Backhoe Loaders specs:

Engine Model - Cat 3054C DINA / Net Power (Standard) 74 hp / 55 kW
Weights:
- Operating Weight (Nominal) - 15257 lb / 6900 kg
- Operating Weight (Maximum) - 21605 lb / 9800 kg
Bucket Capacity - General Purpose - 1.25 yd3 / 0.96 m3
Lift Capacity @ Full Height - 5292 lb / 2400 kg
Bucket Breakout Force - 8524 lb / 37.9 kN
Turning Circle: outside, front wheels - 26.4 ft / 8 m
Turning Circle: outside, widest loading bucket - 34.1 ft / 10.6 m

Comments

blogger said…

Cat 416D Backhoe Loader Weights specs:

Operating Weight - Maximum 10200.0 kg
Operating Weight - Nominal 6792.0 kg
Cab - ROPS/FOPS 220.0 kg
Ride Control 22.0 kg
Four Wheel Drive 155.0 kg
MP Bucket (0.96 m3/1.25 yd3) - With Fold-Over Forks 884.0 kg
MP Bucket (0.96 m3/1.25 yd3) - Without Fold-Over Forks 714.0 kg
Extendible Stick - No Weights 314.0 kg
Air Conditioning 38.0 kg
Counterweights - Option 1 116.0 kg
Counterweights - Option 2 231.0 kg
Counterweights - Option 3 488.0 kg

Cat 416D Backhoe specs:

Dig Depth - Standard 4360.0 mm
Dig Depth - E-Stick Retracted 4402.0 mm
Dig Depth - E-Stick Extended 5456.0 mm
Reach from Swing Pivot - Standard 5618.0 mm
Reach from Swing Pivot - E-Stick Retracted 5657.0 mm
Reach from Swing Pivot - E-Stick Extended 6666.0 mm
Bucket Rotation 205.0 °
Bucket Dig Force - Standard 51.8 kN
Bucket Dig Force - E-Stick Retracted 51.1 kN
Bucket Dig Force - E-Stick Extended 51.1 kN
Stick Dig Force - Standard 31.8 kN
Stick Dig Force - E-Stick Retracted 31.8 kN
Stick Dig Force - E-Stick Extended 23.4 kN
Stick Lift at 2440 mm (8 ft) - Standard 2321.0 kg
Stick Lift at 2440 mm (8 ft) - E-Stick Retracted 2112.0 kg
Stick Lift at 2440 mm (8 ft) - E-Stick Extended 1323.0 kg
Loading Height - Standard 3636.0 mm
Loading Height - E-Stick Retracted 3577.0 mm
Loading Height - E-Stick Extended 4145.0 mm
Loading Reach - Standard 1768.0 mm
Loading Reach - E-Stick Retracted 1868.0 mm
Loading Reach - E-Stick Extended 2771.0 mm

Cat 416D Loader specs:

Bucket Capacity - General Purpose 0.76 m³
Bucket Width - General Purpose 2262.0 mm
Dump Height at Maximum Angle - Single Tilt 2651.0 mm
Dump Reach at Maximum Angle - Single Tilt 772.0 mm
Dig Depth - Single Tilt 106.0 mm
Lift Capacity at Full Height - Single Tilt 2547.0 kg
Bucket Breakout Force - Single Tilt 40.9 kN

Cat 416D Hydraulic System specs:

Circuit Type Load-sensing, closed center
Pump Capacity at 2,200 rpm 132.0 l/min
System Pressure 22700.0 kPa
Pump Type Variable-flow, axial piston
Steering Type Front wheel
Power Steering Hydrostatic
2WD Cylinder - Bore 65.0 mm
2WD Cylinder - Stroke 120.0 mm
2WD Cylinder - Rod Diameter 36.0 mm
4WD Cylinder - Bore 65.0 mm
4WD Cylinder - Stroke 120.0 mm
4WD Cylinder - Rod Diameter 36.0 mm
Brake System Inboard, oil-immersed, multiple disc

Cat 416D Power Train specs:

Power Shuttle Transmission - Forward 1st 6.0 km/h
Power Shuttle Transmission - Forward 2nd 9.5 km/h
Power Shuttle Transmission - Forward 3rd 19.8 km/h
Power Shuttle Transmission - Forward 4th 39.9 km/h
Power Shuttle Transmission - Reverse 1st 6.0 km/h
Power Shuttle Transmission - Reverse 2nd 9.5 km/h
Power Shuttle Transmission - Reverse 3rd 19.8 km/h
Power Shuttle Transmission - Reverse 4th 39.9 km/h

Cat 416D Operating Specifications - Backhoe:

Turning Circle - Outside - Front Wheels 8.16 m
Turning Circle - Outside, Widest Loading Bucket 10.74 m

Cat 416D Service Refill:

Cooling System - A/C 15.9 l
Cooling System - High-Ambient 16.7 l
Fuel Tank 144.0 l
Engine Oil - With Filter 7.6 l
Transmission - Torque Converter - Power Shuttle - 2WD 18.5 l
Transmission - Torque Converter - Power Shuttle - 4WD 18.5 l
Rear Axle 16.5 l
Rear Axle - Planetaries 1.7 l
Front Axle (4WD) 11.0 l
Front Axle - Planetaries 0.7 l
Hydraulic System 79.5 l
Hydraulic Tank 37.9 l

Cat 416D Standards:

Brakes SAE J/ISO 3450, ISO 3450 1996
Cab - ROPS SAE J1040 May 1994/ISO 3741 1994
Cab - Sound ANSI/SAE J1166 Oct 98 is 82.4 dB (A)
Exterior Sound SAE J88 JUN86 is 72.3 dB (A)

Cat 416D Axle Ratings:

Front Axle (2WD) - Static 22964.0 kg
Front Axle (2WD) - Dynamic 9186.0 kg
Front Axle (4WD) - Static 22964.0 kg
Front Axle (4WD) - Dynamic 9186.0 kg
Rear Axle - Static 22964.0 kg
Rear Axle - Dynamic 9186.0 kg

Cat 416D Tires:

Front 2WD Standard Size 11L-16 F-3
Standard Ply 12

2:50 PM

CAT C-16 / C-15 Diesel Engine Specs for Heavy-Duty Trucks

Caterpillar C-16 Truck Engines offer a wide operating range and high torque rise which promotes the use of transmissions with fewer gears. Even with this built-in feature, heavy/specialty haulers must remember their trucks should be geared to achieve the appropriate compromise between startability and desired road speed. Typical loads of 80 000 Ib or less are less affected by improper drive train specing than are heavy haulers. In general, either application shares one similar recommendation - gear fast/run slow is essential for good fuel consumption. If any of the following conditions are present, special attention should be given to proper transmission and axle specifications. A complete Caterpillar Truck Engine Pro (TEP) C-16 analysis is available from your local Caterpillar or truck dealer. CAT C-16 / C-15 Diesel Engine for Heavy-Duty Trucks Crankcase breather, valve cover mounted Electronic data link, ATA/SAE Electronic control module (ECM) Electronically controlled

Caterpillar 3208 TA Engine Specs & Key Features

The Caterpillar 3208 TA Marine Engine is designed to meet the rigorous demands of the marine environment. Whether you're operating a commercial fishing vessel, a yacht, or a workboat, this engine offers unmatched performance and versatility. With its turbocharged and aftercooled design, the 3208 TA delivers impressive power, ensuring you can navigate through rough waters and reach your destination quickly and efficiently. But it doesn't stop there – the Caterpillar 3208 TA Marine Engine is also highly fuel-efficient, ensuring you can make the most of every drop of fuel. Its advanced engine management system optimizes fuel delivery and combustion, resulting in reduced emissions and lower operating costs. With enhanced fuel economy, you can extend your range and spend more time on the water enjoying the journey. Caterpillar 3208 TA Engine Specs V-8, Four-Stroke-Cycle Diesel; Emissions - IMO compliant; Bore — mm (in) - 114.3 (4.5); Stroke — mm (in) - 127 (5.0); Displacement

Caterpillar D2 Diesel Tractor, 1938

The Caterpillar D2 diesel engine required a gas fueled pony motor to crank the diesel up to speed. The pony motor originally was recoil starting, but later models were electric start. The operator would start the pony motor and when the diesel engine was up to running speed and hot enough, about 15 minutes, the operator would turn on the diesel fuel valve and, hopefully, the fuel would fire and Cat D2 engine would run start running. The operator would shut off the gas flow to the pony motor and release the clutch to disengage it from the diesel engine. It was a little more complicated than this, what with releasing the decomp and other manipulations... Cat D2 weighed between 6000 and 6700 lbs. Caterpillar D2 was manufactured from 1938 through 1956. Caterpillar D2 Diesel Tractor Specs Length - 108 in (274 cm); Height - 57.5 in (146 cm); Weight - 7,420–8,536 lb (3,366–3,872 kg); Propulsion - Caterpillar tracks (12 in (30 cm)); Engine model Inline-4 cyl diesel eng

How Catalytic Converters Work

If you’re interested in vehicles as well as keeping our Earth safe, you may be interested in learning more about catalytic converters and how these important devices help to combat against pollution. These devices are a great way to help keep the air around us clean. While this is a hot topic, many people have questions about the use of catalytic converters. Take a look at the following information to learn more about catalytic converters. What is a catalytic converter? A catalytic converter is a device that helps to turn toxic byproducts found in an engine into less toxic substances through the use of chemical reactions. As a car runs, the catalytic converter turns pollutants into less harmful substances before they leave a vehicle through the exhaust pipe . This can help to clean up the air significantly! Are catalytic converters only found in standard automobiles? No! While they are found in standard automobiles, they are also in many other machines. This includes buse

Caterpillar 247B & Cat 257B Multi Terrain Loaders

The B-Series machines employ the proven anti-stall system and pilot hydraulic joystick controls that make Caterpillar Multi Terrain Loaders easy to operate. B-Series improvements include a deluxe joystick design that incorporates positive-action buttons to control work tool hydraulic or electrical functions. An ergonomically designed arm bar is rounded and sculpted to provide superior operator comfort, and the redesigned gauge panels are easy to read. The B-Series cab offers a new door option with 25 percent more glass that improves sight lines to the working area. CAT 247B / 257B Multi Terrain Loader Specs Caterpillar 247B Caterpillar 257B Operating weight 6,668 lb (3024 kg) 7,559 lb (3428 kg) Rated operating capacity at 35 percent tipping load Rated operating capacity at 50 percent tipping load 1,367 lb (620 kg)1,950 lb (885 kg) 1,615 lb (732 kg)2,3100 lb (1047 kg) Engine model Cat 3024C T Cat 3024C T Net

Cat C18 Engine Specs & Advantages

The Cat® C18 Diesel Engine is offered in ratings ranging from 429-522 bkW (575-700 bhp) @ 1800-1900 rpm. Industries and applications powered by Cat C18 engines include: Agriculture, Ag Tractors, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers. Cat C18 Specs With plenty of options to keep the engine package size to a minimum, the Cat C18 is a fully-configurable engine giving owners the power to customize based on a variety of applications. Cat C18 Engine Power Rating Maximum Power - 800 HP Maximum Torque - 2736 lb-ft @ 1300 rpm Rated Speed - 1800-2000 Minimum Power - 575 HP Emission Standards - EU Stage V Cat C18 Diesel Engine Specifications Engine Configuration - In-Line 6 Bore - 5.7 in Stroke - 7.2 in Displacement - 1

Caterpillar Equipment

Search This Blog